A fireproof coating manufacturer explains how fireproof coatings work.
Release date:
2023-03-17
Author:
Zhengxiang Fireproof Materials
A fireproof coating manufacturer explains how fireproof coatings work. Fireproof coating manufacturers explain that, based on their characteristics, fireproof coatings can be divided into intumescent fireproof coatings and non‑intumescent fireproof coatings. After film formation, an intumescent flame‑retardant coating behaves like ordinary paint at room temperature; however, when exposed to flame or high temperatures, the coating foams and chars vigorously, forming a flame‑retardant charred foam layer that is tens to hundreds of times thicker than the original film.
Fire-retardant coating manufacturer Here’s how fire-retardant coatings work.
Fire‑retardant coating manufacturers explain that, based on their characteristics, fire‑retardant coatings can be classified into intumescent and non‑intumescent types. After film formation, an intumescent coating behaves like ordinary paint at room temperature; however, when exposed to flame or high heat, it foams and chars vigorously, forming a charred foam layer that is tens to hundreds of times thicker than the original film. This greatly reduces thermal conductivity, so the heat transferred to the substrate through the charred foam layer is only a fraction—often several dozen to several hundred times less—of that transmitted by a non‑intumescent coating, thereby effectively protecting the substrate from external ignition sources. Furthermore, under flame or high‑temperature conditions, physical changes such as softening, melting, evaporation, and expansion, along with chemical processes like decomposition, degradation, and crosslinking of polymers, fillers, and other components, absorb substantial amounts of heat, delaying the heating of the protected material. In addition, the non‑combustible gases released during thermal decomposition of the coating dilute the concentrations of flammable gases and oxygen produced by the thermal breakdown of organic materials, further inhibiting the combustion process.
Fire‑retardant coating manufacturers explain that non‑intumescent fire retardants achieve their flame‑retardant effect primarily through three mechanisms: first, the coating itself is inherently flame‑retardant and non‑combustible; second, under flame or high‑temperature conditions, the coating decomposes and releases non‑combustible gases (such as water vapor, ammonia, and carbon dioxide) to dilute oxygen and flammable gases; third, the coating forms a non‑combustible inorganic glaze layer when exposed to flame or high heat. This glaze layer has a dense structure that effectively isolates oxygen and provides thermal insulation for a certain period. Non‑intumescent fire retardants are mainly used to protect wood, fiberboard, and other panel materials, applied to surfaces such as wooden roof trusses, ceilings, doors, and windows. Intumescent fire retardants can serve as either coatings or putties, protecting cables, polyethylene pipes, and insulating boards. Emulsion‑based and solvent‑based intumescent fire retardants are suitable for fire protection in construction, electrical systems, and cable applications. New types of fire retardants include transparent fire retardants, water‑soluble intumescent fire retardants, phenolic fire retardants, latex fire retardants, polyvinyl acetate emulsion fire retardants, room‑temperature self‑drying water‑soluble fire retardants, polyolefin fire‑insulating coatings, modified high‑chlorinated polyethylene fire retardants, chlorinated rubber intumescent fire retardants, firewall coatings, foam fire retardants, wire and cable fire retardants, novel fire retardants, and refractory coatings for casting, among others.
Fire-retardant coating manufacturer Here are the application methods and precautions for fire-retardant coatings:
1. Before construction, the substrate surface should be thoroughly cleaned. If the substrate is already painted, the paint must be removed or sanded off with water; wooden substrates may only be painted after they have been exposed.
2. Before applying the transparent fire-retardant coating, use indirect heating (water bath) until it becomes completely transparent and uniformly mixed, then apply it; both spraying and brushing are acceptable.
3. Each coat should be 0.2–0.3 mm thick, with an interval of 8–12 hours between coats. In humid conditions or high humidity, extend the drying time for the second coat as needed to ensure the previous coat is fully dry before applying the next. Additionally, ensure a smooth finish when applying the transparent fire‑retardant coating.
4. The reference theoretical application rate for transparent fire-retardant coating is 500 g/㎡. After the primer has fully dried, apply two coats of topcoat to ensure an aesthetically pleasing finish. The ambient temperature during application should be between 5 and 35°C, and the relative humidity should be below 40%.
Tag
Recommended Information
Contact Us
WhatsApp:
Phone:
Email:
Address:
Northwest corner of the intersection of Fengya Avenue and Shaoze Road, Xinxing Industrial Park, Jize County, Handan City, Hebei Province