Hebei Fireproof Coating Manufacturer: Introduction to Application Methods for Fireproof Coatings in Hebei


Release date:

2022-05-11

Author:

Zhengxiang Fireproof Materials

Hebei Fireproof Coating Manufacturer: Introduction to Application Methods for Fireproof Coatings in Hebei

Introduction to Fireproof Coating Application Methods in Hebei Province

   Hebei fireproof coating Construction method Scraper application: A metal or non-metallic scraper—such as a hard rubber blade, fiberglass scraper, or horn scraper—is used to manually apply and spread the material. This method is suitable for applying various thick-paste fire-resistant coatings and putties.


 Fireproof Coating in Hebei – Fireproof Coating Manufacturer in Hebei


   Application Methods for Fire-Retardant Coatings in Hebei Province Roll coating: The roller is a hollow cylinder of small diameter with long, tufted synthetic fibers attached to its surface. Two washers are fitted at each end of the cylinder, which has a central hole through which a bent handle passes. To use it, first dip the roller into the paint to saturate it, then press firmly to roll the paint onto the desired surface. Roll-coating equipment that uses compressed air to convey the paint has also been developed.

   Hebei fireproof coating Construction method Brush application: This method is suitable for coating objects of any shape, and most fire-retardant coatings can be applied using it. Brushing readily penetrates the fine pores on metal surfaces, thereby enhancing adhesion. Its drawbacks include low production efficiency, high labor intensity, and, in some cases, visible brush marks on the coating surface that compromise its aesthetic appearance.

   Application Methods for Fire-Retardant Coatings in Hebei Province Spray application: A method in which paint is atomized using compressed air and a spray gun. Its advantages include uniform coating quality and high production efficiency. Its disadvantages are that some paint is wasted and the extensive evaporation of solvents can harm the operator’s health. The key piece of equipment for air spraying is the spray gun. Based on the paint delivery system, spray guns are typically classified into gravity-feed, suction-feed, and pressure-feed types; they are also divided into small- and large‑size categories according to spraying capacity. For paints with high viscosity, higher air pressure is required, so a larger nozzle diameter should be selected; for paints with low viscosity, lower pressure suffices, allowing the use of a smaller nozzle diameter. The air pressure used in air spraying is generally 0.3–0.6 MPa.


Tag

Leave a message online

Fill out the form with your details, and our team will assist you in finding the best solution.

Submit Now

Contact Us


WhatsApp:

+8613091100291

Address:

Northwest corner of the intersection of Fengya Avenue and Shaoze Road, Xinxing Industrial Park, Jize County, Handan City, Hebei Province