Application of fireproof coatings in Hebei Province


Release date:

2022-08-09

Author:

Zhengxiang Fireproof Materials

The construction techniques and methods for applying fireproof coatings in Hebei are quite common, yet many people are not fully familiar with them. Fireproof coating in Hebei refers to the process of using tools and equipment during application to ensure an even coat that covers the surface of the object.

   Hebei fireproof coating construction of

  

79b2bcda-97d7-4f88-9b4e-1440c95f8bfa.jpg


  The construction techniques and methods for applying fireproof coatings in Hebei Province are quite common, yet many of us are not very familiar with them. Hebei fireproof coating This refers to using tools and equipment during construction to apply the coating evenly onto the surface of an object. Avoid proceeding blindly, as this can create unnecessary problems. Below is a detailed overview of the application process for fire-retardant coatings and the methods used to apply them.

  I. Design Process for Fireproof Coating Construction Technology in Hebei Province

  1. Before applying fireproof coating to steel structures, the steel frame surfaces shall undergo rust removal and anti-corrosion treatment. Epoxy zinc-rich primer is recommended; epoxy anti-corrosion coating may also be used. Prior to fireproof coating application, the anti-corrosion primer must be fully dry.

  2. Hebei fireproof coating should be mixed before application and can be used immediately after mixing.

  3. The first coat should be applied at a thickness of 0.10–0.15 mm, and the second coat should be applied after the surface has dried. The coating thickness for each subsequent coat should be 0.15–0.20 mm. After each application, the total coating thickness should be maintained at approximately 0.20 mm, and the cumulative thickness must not exceed 0.30 mm before the specified target is reached. Allow sufficient time between applications to ensure the coating is no longer tacky to the touch (typically about 18–24 hours), adjusting according to ambient temperature and site conditions. Ensure adequate ventilation at the work site, with wind speeds not exceeding 5 m/s, and prevent condensation on exterior surfaces or building components during outdoor operations.

  4. Application is primarily by brushing; spraying can also be used, but this results in a 15–30% material waste.

  II. Hebei fireproof coating Construction method

  1. Scraping: Metal tools such as fiberglass scrapers, corner scrapers, plastic scrapers, hard rubber sheets, or other non-metallic hand tools can be used frequently to treat surfaces of objects and to scrape off excess material from various thick-paste fireproof coatings or areas with no gaps.

  2. Roller Coating: The roller coating method is generally more suitable for applying coatings to walls. Paint is applied to the roller, and then the roller is rolled back and forth across the wall surface to adhere the paint. A roller consists of a hollow cylinder with a relatively uniform diameter; its surface is covered with long nap made of synthetic fibers. Two perforated washers are attached to each end of the cylinder, and a bent handle passes through holes in these washers. With advancements in network and information technology, roller coating devices that use air compressors to deliver paint have been developed.

  3. Brush application: This method is suitable not only for wall construction but also for the surfaces of objects with any other shape; most fire-retardant coatings can be applied by brushing. Brush application is a versatile technique that reaches pores and joints on an object’s surface, thereby enhancing adhesion. However, it suffers from low production efficiency and high labor intensity, and brush marks may sometimes remain on the coating surface, affecting its decorative appearance.

  

 Hebei fireproof coating


  The above is information on the application techniques and methods for fire‑retardant coatings in Hebei. We hope it has been helpful. During application, different methods should be used depending on the specific substrate and type of flame‑retardant material to achieve optimal results.


Tag

Leave a message online

Fill out the form with your details, and our team will assist you in finding the best solution.

Submit Now

Contact Us


WhatsApp:

+8613091100291

Address:

Northwest corner of the intersection of Fengya Avenue and Shaoze Road, Xinxing Industrial Park, Jize County, Handan City, Hebei Province