Practical insights: in one minute, learn about the material composition of fireproof coatings in Hebei.


Release date:

2022-05-25

Author:

Zhengxiang Fireproof Materials

What are the material components of fireproof coatings in Hebei? Let’s analyze them together below. The basic constituents of thick-coat steel structure fireproof coatings are binders (such as silicate cement, magnesium oxychloride, or other inorganic high-temperature binders), aggregates (including expanded vermiculite, expanded perlite, aluminosilicate fibers, mineral wool, rock wool, etc.), chemical additives (modifiers, hardeners, water repellents, etc.), and water. Silicate cement, magnesium oxychloride cement, and inorganic binders serve as the base materials for steel structure fireproof coatings; common inorganic binders include alkali metal silicates and phosphates.

   Hebei fireproof coating What is the material composition? Let’s analyze it together below.

  The basic components of thick-coat intumescent fireproof coatings for steel structures are binders (such as silicate cement, magnesium oxychloride, or inorganic high-temperature binders), aggregates (including expanded vermiculite, expanded perlite, aluminosilicate fibers, mineral wool, and rock wool), chemical additives (such as modifiers, hardeners, and water repellents), and water. Silicate cement, magnesium oxychloride cement, and inorganic binders serve as the base materials for steel structure fireproof coatings; common inorganic binders include alkali metal silicates and phosphates.

  

 Hebei fireproof coating


  However, alkali metal silicates often contain free alkali metal ions, which can react chemically with acidic gases and CO2 in the air. If an alkaline silicate is used alone as the binder in a coating, the resulting film will be waterproof, moisture-resistant, and weather-resistant; yet the coating may readily exhibit defects such as cracking and chalking. Therefore, when employing alkali metal silicate as the binder for fire‑retardant coatings on steel structures, the primary challenge to address is its modification—specifically, mitigating the release of free alkali metal ions.

  Phosphate-based binders are also a commonly used type of inorganic adhesive. When employed as the base material in fire‑retardant coatings, they avoid the issue of alkaline oxides reacting with acidic gases in the air, thereby enhancing the coating’s weatherability, water resistance, and other physicochemical performance characteristics. However, in phosphate binders, the molar ratio of M/P (where M represents a metal and P represents phosphorus) directly affects storage stability, water resistance, and the adhesion between the coating and the steel substrate. Consequently, controlling this molar ratio is crucial in the development of phosphate‑based fire‑retardant coatings for steel structures.

  Thick fireproof coatings for steel structures are bulky and require large quantities, increasing the building’s weight. Therefore, lightweight materials and high-performance insulating aggregates should be incorporated into the coating to reduce its density; commonly used lightweight insulating aggregates include expanded vermiculite and expanded perlite.

  Vermiculite is an iron- and magnesium-bearing aluminosilicate mineral with a layered structure containing water of crystallization between the layers. When heated, it expands and curls like a leech, hence its name. After drying, crushing, sieving, and calcination at 850–1000°C, the particles expand more than 20-fold, forming expanded vermiculite. Its bulk density ranges from 80 to 200 kg/m³, with a thermal conductivity of 0.17–0.25 W/(m·K). It exhibits excellent fire resistance, good sound absorption and insulation properties, and is non-toxic and odorless. Hebei fireproof coating An important additive.

  Perlite is a glassy rock that, when crushed, screened, preheated, and instantly roasted, can expand to about 20 times its original volume, forming expanded perlite with a honeycomb-like foam structure. Expanded perlite is extremely lightweight, with a bulk density of 80–250 kg/m³ and a thermal conductivity of 0.042–0.076 W/(m·K). It features excellent thermal insulation, fire resistance, non-toxicity, and good chemical stability, and it is also Hebei fireproof coating An important filler in .


Tag

Leave a message online

Fill out the form with your details, and our team will assist you in finding the best solution.

Submit Now

Contact Us


WhatsApp:

+8613091100291

Address:

Northwest corner of the intersection of Fengya Avenue and Shaoze Road, Xinxing Industrial Park, Jize County, Handan City, Hebei Province