A One-Minute Guide to the Application Methods of Fire-Retardant Coatings in Hebei Province


Release date:

2022-06-01

Author:

Zhengxiang Fireproof Materials

Based on principles of physical chemistry, the process by which a coating expands and foams to form a foam layer is endothermic due to volume expansion, and it also consumes heat released during combustion, thereby helping to lower the system’s temperature. These factors enable Hebei fire‑retardant coatings to achieve significant fire‑resistance and thermal insulation performance.

   Hebei fireproof coating What is the fire‑proofing principle? Let’s take a brief look together below.

  The fire‑resistant and insulating principle of ultra‑thin or thin intumescent coatings applied to steel structures is that, when exposed to fire, the coating expands and forms a foam layer. This foam not only blocks oxygen but also, due to its porous structure, provides excellent thermal insulation, thereby slowing the rate at which heat is transferred to the underlying substrate. Based on physicochemical principles, the expansion and foaming process generates an endothermic reaction as the coating volume increases, while simultaneously consuming heat released during combustion, which helps lower the system temperature. These factors enable fire‑retardant coatings to deliver significant fire‑resistant and insulating performance.

  

 Hebei fireproof coating


  The fire-resistant and heat-insulating principle of thick-type intumescent coatings applied to steel members is that, Hebei fireproof coating When a fire occurs, the volume of the coating remains essentially unchanged, yet its thermal conductivity is very low, slowing the transfer of heat to the protected substrate. The fire‑retardant coating itself is noncombustible and acts as a barrier for steel members, blocking radiant heat and thereby preventing direct flame and high‑temperature attack. Furthermore, certain components in the coating undergo exothermic reactions that produce noncombustible gases, consuming substantial heat and helping to lower the system temperature. Consequently, the fire‑resistance performance is significant, providing highly effective protection for steel against fire. Additionally, this type of steel‑structure fire‑retardant coating forms a vitreous protective layer without volumetric change, which can isolate oxygen and prevent it from contacting the combustible substrate, thus avoiding or reducing combustion. However, the vitreous protective layer formed by such coatings often has a high thermal conductivity and poor insulating performance. To achieve adequate fire‑resistance and thermal insulation, thick‑film fire‑retardant coatings generally require relatively thick applications to meet the required performance standards.

  What are the application methods for fireproof coatings in Hebei? Let’s take a brief look together below.

  Scraper application: A metal or non-metallic scraper—such as a hard rubber blade, fiberglass scraper, or horn scraper—is used to apply various thick-paste fire-resistant coatings and putties.

  Roller coating: The roller is a hollow cylinder with a very small diameter, its surface covered with long nap made of synthetic fibers. Two washers are mounted at each end of the cylinder, which has a central hole through which a bent handle passes. To use it, dip the roller into the paint and then press it firmly against the desired surface. A roller-coating device equipped with an air compressor to deliver paint has been developed.

  Brush application: This method is suitable for coating objects of any shape, and most fire-retardant coatings can be applied this way. Brushing easily penetrates the pores on metal surfaces, enhancing adhesion; however, it has low productivity, requires significant labor, and may leave brush marks on the coating surface, affecting its aesthetic appearance.

  Spray coating is a construction method that uses compressed air and a spray gun to atomize the coating. Its advantages include uniform coating quality and high production efficiency. Its disadvantages are that some paint is wasted and solvent evaporation can harm the operator’s health. The key equipment for air spraying is the spray gun, which, depending on the paint supply method, is typically classified into gravity-feed, suction-feed, and pressure-feed types. Based on spraying capacity, it is further divided into small and large models. For paints with high viscosity, higher air pressure is required, and larger nozzle diameters are needed; for low-viscosity paints, lower pressure suffices, and smaller nozzles can be used. The typical air pressure for air spraying ranges from 0.3 to 0.6 MPa.


Tag

Leave a message online

Fill out the form with your details, and our team will assist you in finding the best solution.

Submit Now

Contact Us


WhatsApp:

+8613091100291

Address:

Northwest corner of the intersection of Fengya Avenue and Shaoze Road, Xinxing Industrial Park, Jize County, Handan City, Hebei Province