What is the mechanism of fire-resistant coatings for steel structures?


Release date:

2022-09-28

Author:

Zhengxiang Fireproof Materials

As one of the more advanced fire-protection technologies developed in recent years, fire-resistant coatings for steel structures not only provide the decorative and protective functions of conventional paints but also offer corrosion resistance, rust prevention, and resistance to acids, alkalis, and salt spray.

  As a structural system for high-rise buildings, steel construction has been widely adopted in the construction industry due to its high strength, light weight, excellent ductility, superior seismic performance, and short construction duration. However, as a building material, steel has inherent limitations in fire resistance. As temperature rises, its mechanical properties—such as yield strength, tensile strength, and modulus of elasticity—decrease sharply. Typically, at temperatures between 450°C and 650°C, steel loses its load-bearing capacity, undergoes significant deformation, and causes bending in columns and beams, leading to structural failure.

  

 Fireproof coating for steel structures


  As one of the more advanced fire protection technologies developed in recent years, Fireproof coating for steel structures It not only provides the decorative and protective functions of conventional coatings but also offers corrosion resistance, rust prevention, and resistance to acids, alkalis, and salt spray. More importantly, because the coating itself is non‑combustible or flame‑retardant, it can prevent flame spread and delay fire escalation during a blaze, thereby better protecting the substrate and averting damage caused by loss of load‑bearing capacity in steel structures. Owing to its superior performance, it is being applied increasingly across a wide range of applications.

  Coatings applied to the surfaces of steel structures in buildings and other constructions can form a fire-resistant, insulating protective layer, thereby increasing the fire-resistance rating of the steel. Currently, both domestically and internationally, fire-retardant coatings for steel structures primarily consist of a base resin, catalyst, charring agent, and foaming agent. The principle of fire resistance and thermal insulation is as follows: when exposed to fire, the coating expands and foams, forming a foam layer. This foam layer not only isolates oxygen but also provides excellent thermal insulation due to its loose texture, which delays heat transfer to the protected substrate.

   Fireproof coating for steel structures Based on the application environment, fire‑protective coatings for steel structures are classified into indoor and outdoor types. They are primarily intended to provide surface fire protection for load‑bearing steel structural members in applications where a fire resistance rating exceeding two hours is required. For example, they are suitable for protecting outdoor load‑bearing steel structures in buildings, aerospace facilities, oil refineries, chemical plants, power stations, metallurgical plants, defense installations, and textile factories. They are also applicable to fire protection of steel structures in petrochemical projects, oil drilling platforms, storage tank supports, automobile manufacturing facilities, and other settings where solvent‑based chemicals pose a fire risk. Such coatings can effectively prevent uncontrolled fire spread, buy valuable time for active firefighting, and reduce disaster losses.

  Once a fire occurs, the intumescent fireproof coating on steel structures rapidly expands to dozens of times its original thickness, with some cases reaching up to 200 times. The fire‑protective effect of the honeycomb or sponge‑like carbon layer on steel can be summarized in three main aspects:

  (1) Barrier effect: The highly expanded char layer effectively isolates the protected steel structure from air and heat sources, thereby significantly reducing the surface temperature of the steel structure and extending its load-bearing capacity during a fire.

  (2) Endothermic effect: The physical changes of the carbonized layer in the polymer coating—softening, melting, and expansion—as well as the thermal decomposition, evaporation, and carbonization of the coating components absorb substantial heat, thereby effectively reducing the surface temperature of the steel structure.

  (3) To halt combustion, the various non-combustible gases produced by the thermal decomposition of interior steel structure fireproof coating components can dilute the oxygen concentration and capture free radicals generated during burning, thereby effectively preventing combustion. The coordinated action of these three processes enables interior intumescent fireproof coatings for steel structures to provide effective fire protection.


Tag

Leave a message online

Fill out the form with your details, and our team will assist you in finding the best solution.

Submit Now

Contact Us


WhatsApp:

+8613091100291

Address:

Northwest corner of the intersection of Fengya Avenue and Shaoze Road, Xinxing Industrial Park, Jize County, Handan City, Hebei Province