Hebei Fireproof Coatings: What are the fire‑protection mechanisms of fireproof coatings, and what methods are used to inspect product quality?
Release date:
2022-07-14
Author:
Zhengxiang Fireproof Materials
Hebei Fireproof Coatings: Fireproof coatings enhance a material’s fire resistance, slow the spread of flames, or prevent combustion for a certain period by applying a coating to the material’s surface. Such coatings are referred to as fireproof coatings or flame-retardant coatings. A fireproof coating is a specialized coating applied to combustible substrates that reduces the flammability of the coated surface, inhibits rapid fire spread, and improves the fire resistance of the coated material.
Hebei Fireproof Coatings: Fireproof coatings enhance a material’s fire resistance, slow flame spread, or prevent combustion for a certain period by applying a coating to the material’s surface. Such coatings are referred to as fireproof coatings or flame-retardant coatings. A fireproof coating is a specialized coating applied to combustible substrates that reduces the flammability of the coated surface, inhibits rapid fire spread, and improves the substrate’s fire resistance. When applied to combustible substrates to alter their surface burning characteristics and prevent rapid fire propagation, or when a special coating is applied to building components to increase their fire-resistance rating, it is termed a fireproof coating. Below… Hebei fireproof coating The manufacturer explains its fire‑proofing mechanism and the methods used to inspect product quality:
I. Hebei fireproof coating The principle of fire protection
The fire-retardant mechanisms of fireproof coatings can generally be summarized into the following five points:
1. Fire-retardant coatings themselves are non-combustible, preventing the protected substrate from coming into direct contact with oxygen in the air.
2. Fire-retardant coatings have a low thermal conductivity, which slows the rate of heat transfer from high temperatures to the substrate.
3. When heated, fire-retardant coatings decompose into non-combustible inert gases, which dilute the flammable gases released by the protected material, making it difficult to ignite or slowing the rate of combustion.
4. Nitrogen-containing fire-retardant coatings decompose upon heating to produce groups such as NO and NH3, which combine with organic free radicals to interrupt the chain reaction and lower the temperature.
5. Intumescent fireproof coatings expand and foam upon heating, forming a carbonaceous insulating layer that encapsulates the protected object, delaying heat transfer to and from the substrate, thereby preventing ignition or loss of strength due to rising temperatures.
II. Hebei fireproof coating Methods for quality inspection
1. Conduct a preliminary on-site inspection of product quality: For intumescent fireproof coatings, cut 2–3 small samples from the already applied substrate, or apply a small amount of sample to 2–3 pieces of 150 mm × 150 mm plywood, applying according to actual construction conditions. After drying, perform a flame test using an alcohol lamp flame approximately 40 mm high, typically applying the flame for 20 minutes. Inspect the coating for foaming. Under normal circumstances, when applied at the specified dosage (generally 500 g/m²), the foam layer of Class I fireproof coating should be thicker than 20 mm, and that of Class II fireproof coating should be thicker than 10 mm. The foam layer should be uniform and dense.
2. When a qualified intumescent fireproof coating is exposed to intense flames from a blowtorch or similar source, it will foam and expand significantly, forming an insulating char layer on the surface that resists burning for several minutes. In contrast, counterfeit or substandard fireproof coatings produce little to no foaming, generate copious loose slag, and allow the underlying wood substrate to burn through rapidly.
3. Verify that the product has a certificate of conformity issued by the National Fire Protection Quality Inspection Center; this information can also be verified online. Fire-retardant coatings are subject to a national mandatory product certification system. Fire-retardant coatings sold on the market must bear both a national mandatory product certification certificate and a type-test compliance report.
4. In practical applications, to ensure the fire-retardant and other performance characteristics of fireproof coatings, a transparent topcoat is generally required. The typical application rate for the fireproof coating is 350–500 g/m², while that for the topcoat is usually 50 g/m².
Tag
Recommended Information
Contact Us
WhatsApp:
Phone:
Email:
Address:
Northwest corner of the intersection of Fengya Avenue and Shaoze Road, Xinxing Industrial Park, Jize County, Handan City, Hebei Province