Introduction to Methods for Identifying Thin-Film Fire-Retardant Coatings
Release date:
2022-12-19
Author:
Zhengxiang Fireproof Materials
Thin‑coat fire‑retardant coatings are formulated primarily from vinyl acetate–ethylene copolymer emulsion, ammonium polyphosphate, and melamine. Made with inorganic refractory materials, these interior thin‑coat fire‑retardant coatings protect steel structures, preventing damage caused by the softening of steel under fire. The product offers excellent adhesion, flexibility, weather resistance, and decorative appeal.
Thin-type fireproof coating What are the methods for identification? Let’s analyze them below.

1. Consumers can verify whether a product has a qualified inspection report issued by the National Fire Protection Quality Inspection Center. Currently, China’s fire-retardant coatings are subject to a type‑approval system for fire protection products. Therefore, if counterfeit thin‑film fire‑retardant coatings lack the corresponding inspection report, their products are undoubtedly fake fire‑retardant coatings.
2. Consumers can also request samples for testing. According to national standards, in addition to meeting fire-resistance requirements, the fire-resistant coating must provide a fire resistance duration of at least two hours after application. By conducting tests, consumers can avoid being deceived by dealers who substitute inferior products for superior ones.
3. To avoid being deceived when purchasing thin‑film fire‑retardant coatings, consumers should not be tempted by low prices. According to industry sources, products priced above RMB 7,000 per ton are generally reliable; any lower price raises serious concerns about quality.
4. Industry insiders point out that the recommended application rate for thin‑fire‑proof coatings is 2 kg/mm, yet some distributors either exaggerate its effectiveness or fail to mention the required amount; consumers should take note.
5. Thin-film fireproof coatings are all environmentally friendly products, and their authenticity can be verified by measuring their VOC content.
Large amusement parks and outdoor steel-framed entertainment facilities use thin fire‑resistant coatings. Especially during holidays, when the parks are crowded with children, fires can easily occur. Applying differently colored thin fire‑resistant coatings to various equipment surfaces not only provides thermal insulation and fire protection but also enhances their appearance.
Thin‑coat fire‑retardant coatings are formulated primarily from vinyl acetate–ethylene copolymer emulsion, ammonium polyphosphate, and melamine. Made with inorganic refractory materials, these interior thin‑coat fire‑retardant coatings protect steel structures, preventing damage caused by the softening of steel under fire. The product offers excellent adhesion, flexibility, weather resistance, and decorative appeal.
Thin-type fireproof coating It offers advantages such as long durability, a thin coating, extended fire resistance, and ease of application. When exposed to fire, the thin indoor fireproof coating rapidly expands, forming a thick, sponge-like intumescent insulating layer that prevents steel structures from bending or collapsing under fire, thereby extending their fire resistance and achieving the desired fire protection effect.
What are the precautions for using thin‑type fire‑retardant coatings? Let’s take a look.
1. Maintenance: After applying the thin-type steel structure fireproof coating NB (BT-02), allow it to cure naturally for 28 days under the same curing conditions as ordinary concrete. If the coating is damaged, it should be repaired promptly.
II. Precautions.
1. The thin-type steel structure fireproof coating NB (BT-02) must be used up within 24 hours of opening the container. Any unused coating should be tightly sealed to prevent moisture absorption.
2. The ambient temperature during application of thin-film fireproof coatings for steel structures must be above 0°C, and the coating must reach its 28-day strength.
3. Construction must be carried out by a professional construction team.
3. Storage and Transportation. Thin-film steel structure fireproof coatings are non-hazardous, non-flammable, and non-explosive. They can be transported as ordinary materials and stored at temperatures between 5°C and 35°C.
Tag
Recommended Information
Contact Us
WhatsApp:
Phone:
Email:
Address:
Northwest corner of the intersection of Fengya Avenue and Shaoze Road, Xinxing Industrial Park, Jize County, Handan City, Hebei Province